GeekVape Aegis Boost Pro 2 E-Cigarettes Wholesale B2B
The Aegis Boost Pro 2 e-cigarette set from GeekVape is a pod system from the well-known GeekVape Aegis series. Manufactured to IP68 standards, the Aegis Boost Pro 2 is particularly shockproof and also protected against water and dust. The battery carrier achieves an output power of a maximum of 100 watts. He achieves this by inserting an 18650 battery cell. This is not part of the scope of delivery and must be purchased separately. The battery cell can be charged in the battery carrier using the included USB-C cable. So it is not necessary to use an external charger for this. With the Aegis Boost Pro 2 you have the opportunity to vape in the sub-ohm range (DL). In addition to a 0.15 ohm atomizer head, you will also find an atomizer head with a resistance of 0.4 ohms included in the scope of delivery. Both heads came from the GeekVape P-Series series. Because of this, you also have the option of using the P-Series head with 0.5 ohms. Please make sure that the evaporator heads are among the wearing parts of an e-cigarette. In order to counteract a negative change in taste and/or vapor development, you should replace evaporator heads with new ones at regular intervals.
scope of delivery
- 1x Aegis Boost Pro 2 battery carrier
- 1x Aegis Boost Pro 2 Pod 4.5ml
- 1x P Series Head 0.15 Ohm (pre-installed) | DL
- 1x P Series Head 0.4 Ohm | DL
- 1x coil tool
- 1x USB-C cable
- 1x user manual
18650 battery cell(s) not included! GeekVape Aegis Boost Pro 2 E-Cigarette
- Output mode: VW, Boost
- Output power: 5 - 100 watts
- Tank volume: 4.5 ml
- Top airflow
- Top filling
- Plug and pull
- DL
- Dimensions: 121.2mm x 43.73mm x 31.65mm
- 0.96" display
- USB-C port
